The gas burner with front mesh for standard kebab machines (code EMP.DN.GAZ.ARZATOR, Empero code M.GAZ-BRL-RDY-001) is the heat source of each level of the gas kebab / shawarma machine. It is the original part of the Empero EMP.DN series and fits most gas kebab machines with standard burners: Ozti (Oztiryakiler), Atalay, Meltem and others. A burner with a burnt or clogged mesh heats unevenly, uses more gas and leaves the meat raw on one side and burnt on the other.
Strong, even radiant heat
The gas and air mixture forms in the Venturi tube, fitted with a brass injector holder and air adjustment, and burns on the front surface of the burner. The front metal mesh, fitted over a perforated plate, glows red and turns the flame into radiant heat, spread evenly over the whole width of the meat. The aluminised steel frame and housing, with fixing lugs, allow direct fitting in the original seat of the machine body.
Why choose this original burner?
Unlike generic burners, the original Empero burner has the same 24 x 17 cm dimensions, connection and fixing lugs as the one in the machine, which makes it suitable for:
Empero EMP.DN.150, EMP.DN.151, EMP.DN.152 gas kebab machines: direct replacement, with no adaptations.
Empero EMP.DN.151-Y and EMP.DN.152-Y V-type machines: the same part on both sides.
Ozti, Atalay, Meltem kebab machines: a standard burner, easy to fit.
Kebab shops and fast food outlets: constant heat during peak hours.
Technical and Functional Advantages:
Front metal mesh: evenly distributed radiant heat.
Venturi tube with air adjustment: clean combustion with a stable flame.
Aluminised steel housing: resistant to heat and grease.
Standard 24 x 17 cm size: compatible with many gas kebab machines.
Specifications at a glance:
Product type: radiant gas burner with front mesh for kebab machine
Product code: EMP.DN.GAZ.ARZATOR
Empero code: M.GAZ-BRL-RDY-001
Compatible with: Empero EMP.DN.150, EMP.DN.151, EMP.DN.152, EMP.DN.151-Y, EMP.DN.152-Y, Ozti, Atalay, Meltem
Dimensions (cm): 24*17
Structure: front metal mesh, aluminised steel frame and housing, Venturi tube with brass injector holder
Easy to use
Before ordering, check the machine model on the rating plate and compare the old burner with the product photos (dimensions 24 x 17 cm, position of the Venturi tube and of the fixing lugs). Close the gas valve or the cylinder and let the machine cool down before removal. Fitting must be carried out by an authorised technician, who fixes the burner in the original seat, fits the injector matching the gas type (natural gas or LPG), adjusts the air and tightens the connection. Finally, check for leaks with leak detection spray, check ignition and even combustion over the whole mesh. The burner measures 24 x 17 cm.
Easy to clean
With the machine switched off and cooled, remove grease and meat residues from the burner frame with a soft brush. Clean the mesh only with compressed air or a soft brush, without pressing. Do not use water, steam or aggressive chemicals, as they can clog the ports and corrode the mesh.
Features and advantages of the gas burner for standard Empero kebab machines
✓ Original Empero part, code M.GAZ-BRL-RDY-001
✓ Front metal mesh for even radiant heat
✓ Venturi tube with brass injector holder and air adjustment
✓ Compatible with Empero, Ozti, Atalay, Meltem
✓ Dimensions 24 x 17 cm