The M.ENJ-ERS-PLS-BYM-053 spray arm sprays water over the dishes in Empero commercial dishwashers: the EMP.1000 and EMP.1000-F hood (guillotine) type models and the EMP.500 front loading models. It can be fitted either at the top or at the bottom, in the upper or lower position. An arm that is cracked, has clogged nozzles or rotates poorly leaves residues on plates and glasses.
Even washing from every angle
The part has 4 arms arranged in a cross, made of grey engineering plastic, with spray nozzles on each arm. The central hub has a bushing for the rotation shaft and is assembled with stainless steel screws. The water jet leaving the nozzles turns the arm, so that the water covers the whole rack and the detergent and rinse water reach every dish.
Why choose this original spray arm?
Unlike generic parts, the original arm has nozzles oriented and sized for the pressure of the Empero pump, which makes it suitable for:
Empero EMP.1000 hood type dishwashers: complete coverage of the rack, top and bottom.
Empero EMP.500 front loading dishwashers: the same part, fitted in the upper or lower position.
Restaurants, canteens and hotels: clean dishes from the first cycle, with no repeat programme.
Catering equipment service: one spare part for both mounting positions.
Technical and Functional Advantages:
Versatile fitting: the same arm fits at the top or at the bottom.
4 arms with nozzles: jet evenly distributed over the whole rack.
Easy rotation: hub with bushing on the rotation shaft.
Durable material: engineering plastic, resistant to hot water and detergents.
Specifications at a glance:
Product type: Spray arm (wash arm) for dishwasher
EMPERO code: M.ENJ-ERS-PLS-BYM-053
Compatible with: Empero EMP.1000, EMP.1000-F, EMP.500
Mounting position: upper or lower
Structure: grey engineering plastic, 4 arms with nozzles
Hub: shaft bushing, stainless steel screws
Easy to use
Before ordering, check the part code and the machine model. Switch the machine off and disconnect it from the power supply, then remove the rack. Remove the old arm from the shaft and fit the new one in the same position, upper or lower; check by hand that it rotates freely. If you are not sure about fitting, call an authorised technician. After fitting, run a cycle without dishes and check the rotation of the arm and the nozzle jets.
Easy to clean
Empero recommends removing and cleaning the spray arms every 15 days. Remove the arm, rinse it under warm running water and clean the nozzles with a toothpick or a soft brush. Remove limescale monthly with vinegar or a descaling solution. Do not use wire brushes or abrasive products, which can deform the nozzles.
Features and advantages of the Empero M.ENJ-ERS-PLS-BYM-053 spray arm
✓ Original Empero part
✓ 4 arms in a cross, with nozzles on each arm
✓ Fits in the upper or lower position
✓ Hub with bushing and stainless steel screws
✓ Compatible with Empero EMP.1000 hood type and EMP.500 front loading machines