The Eaton DILEM-01-EA contactor is the part that switches the power circuits of professional dishwashers and Empero equipment on and off: the boiler and tank heating elements, the wash pumps and the motors. It is a Moeller series mini contactor with 3 power poles and one normally closed auxiliary contact, a 230 V 50 Hz / 240 V 60 Hz coil and a rated current of 9 A in AC-3 duty (4 kW at 400 V). When the contactor fails, the machine no longer heats the water or no longer starts the programme; replacing it quickly brings the equipment back into service.
Reliable switching of power circuits
The contactor receives the command from the control board, the thermostat or the programmer and closes all three phases of the load at the same time. The power contacts carry 20 A in AC-1 duty (resistive loads such as heating elements) and 9 A in AC-3 duty (motors). The screw terminals are clearly marked on the housing (L1, L2, L3 to T1, T2, T3, coil A1-A2, auxiliary contact 21-22), and the contactor mounts on a DIN rail or with screws on a panel.
Why choose this original contactor?
Unlike generic parts, the Eaton DILEM-01-EA contactor is made in Germany, complies with IEC/EN 60947-4-1 and has the same terminal layout as the originally fitted part, which makes it suitable for:
Professional dishwashers: switches the boiler and tank heating elements, the wash pump and the drain pump.
Empero electric ovens and fryers: switches the heating element groups on the thermostat's command.
Boiling pans and cooking equipment: switches the heating on and off safely, on the control system's command.
HoReCa electrical panels: direct replacement, no wiring changes.
Technical and Functional Advantages:
230 V 50 Hz / 240 V 60 Hz coil: works directly at the control voltage used in professional kitchens.
4 kW switching power at 400 V: suited to small and medium three-phase heating elements and motors.
1NC auxiliary contact: allows signalling and interlocking in the wiring diagram of the equipment.
Compact design: narrow housing, quick mounting on a DIN rail or panel.
International approvals: CE, UL, CSA, compliant with IEC/EN 60947-4-1.
Specifications at a glance:
Product type: Power contactor / three-phase mini contactor
Eaton code: DILEM-01-EA (230V50HZ, 240V60HZ)
Compatible with: professional dishwashers and Empero equipment fitted with an Eaton DILEM-01 contactor; the code is printed on the front of the contactor, below the Eaton logo
Switching power: 2.2 kW at 230 V / 4 kW at 400 V (AC-3)
Rated current: 9 A (AC-3), 20 A (AC-1)
Contacts: 3 NO poles + 1 NC auxiliary contact
Easy to use
Before ordering, check the code on the front of the old contactor (DILEM-01-EA) and the coil voltage marked on the housing (230 V 50 Hz / 240 V 60 Hz). Disconnect the equipment from the power supply and make sure there is no voltage in the panel. Photograph or mark the wires before removal, then move them to the same terminals of the new contactor. Fitting and electrical connection must be carried out by an authorised technician, using the tightening torque shown on the label (1.2 Nm). After fitting, check the operation of the equipment over a full cycle.
Easy to clean
The contactor is maintenance-free. Keep the electrical panel dry and free of dust and grease: wipe the surrounding area with a dry cloth, only with the equipment disconnected from the power supply. Do not use water, aggressive chemicals or sprays on the contactor.
Features and advantages of the Eaton DILEM-01-EA contactor
✓ Original Eaton product, Moeller series, made in Germany
✓ 3 power poles + 1 NC auxiliary contact
✓ 9 A in AC-3 duty, 20 A in AC-1 duty, 4 kW at 400 V
✓ 230 V 50 Hz / 240 V 60 Hz coil
✓ DIN rail or panel mounting, screw terminals
✓ Weight: 0.2 kg