The Siemens SIRIUS 3RT2017-1AP01 is the power contactor used in Empero professional equipment to switch heating elements, motors and pumps. It belongs to the SIRIUS 3RT2 range, size S00, has 3 power poles, one normally open auxiliary contact and a 230 V AC 50/60 Hz coil, and switches 12 A in AC-3 duty, i.e. 5.5 kW at 400 V. If this contactor fails, the equipment no longer heats or no longer starts; with the original Siemens part the repair is quick, without adaptations.
High power in a compact housing
When coil A1-A2 is energised, the three main contacts (1/L1-2/T1, 3/L2-4/T2, 5/L3-6/T3) close at the same time and supply the load. The contactor is rated for 12 A in AC-3 duty at 380-400 V, and auxiliary contact 13-14 NO can be used for signalling or self-holding. The screw terminals, the clip for 35 mm DIN rail and the holes for M4 screws (at 35 x 50 mm) allow mounting in any electrical panel.
Why choose this original contactor?
Unlike generic parts, the original SIRIUS contactor is made by Siemens in Germany (Amberg), carries UL and CSA approvals and matches the dimensions of the originally fitted part, which makes it suitable for:
Empero electric ovens: switches the heating element groups on the command of the thermostat or controller.
Fryers and hobs: supplies the three-phase heating and switches it off safely.
Professional dishwashers: switches the boiler and tank heating elements, as well as the pumps.
Equipment with three-phase motors: direct-on-line starting for motors up to 5.5 kW at 400 V.
Technical and Functional Advantages:
High current for size S00: 12 A in AC-3 duty, 5.5 kW at 400 V.
230 V AC 50/60 Hz coil: works at the control voltage used in professional kitchens.
Built-in 1NO auxiliary contact: no extra auxiliary block needed for signalling.
Flexible mounting: on 35 mm DIN rail or with M4 screws on a panel.
Siemens quality: part of the SIRIUS 3RT2 range, made in Germany.
Specifications at a glance:
Product type: Siemens SIRIUS 3RT2 power contactor, size S00
Siemens code: 3RT2017-1AP01
Front marking: G/201105 E06
Compatible with: Empero professional equipment (ovens, fryers, dishwashers) fitted with a Siemens 3RT2017 contactor; the code is printed on the front of the contactor
Switching power: 5.5 kW at 400 V (AC-3)
Rated current: 12 A (AC-3)
Contacts: 3 NO poles + 1 NO auxiliary contact
Easy to use
Before ordering, check the code on the front of the old contactor (3RT2017-1AP01) and the coil voltage, 230 V 50/60 Hz, printed next to terminal A2. Disconnect the equipment from the power supply and make sure there is no voltage. Mark the wires, release the mounting clip, remove the contactor from the DIN rail and move the conductors to the same terminals of the new part. Fitting and electrical connection must be carried out by an authorised technician; after fitting, check the operation of the equipment over a full cycle.
Easy to clean
The contactor is maintenance-free. Keep the electrical panel dry and clean; wipe dust and grease from the surrounding area with a dry cloth, only with the equipment disconnected from the power supply. Do not use water, solvents or sprays on the contactor.
Features and advantages of the Siemens SIRIUS 3RT2017-1AP01 contactor
✓ Original Siemens part, made in Germany
✓ 3 power poles + 1 NO auxiliary contact
✓ 12 A in AC-3 duty, 5.5 kW at 400 V
✓ 230 V AC, 50/60 Hz coil
✓ Mounting on 35 mm DIN rail or with M4 screws