The Empero 60° pilot burner (code TPK.FDV60) is the pilot with a head angled at 60°, used on grills, fryers, ranges and other HoReCa gas appliances. The short outlet tube, bent at 60°, sends the flame exactly towards the main burner, even when the pilot is fitted at the side of or under the burner. When the pilot gets clogged or deformed, the thermocouple is no longer heated, the safety valve shuts off the gas and the appliance no longer starts.
Flame directed at 60°, towards the burner
The T-shaped brass body receives the gas through a nut connection and sends it to the pilot head, a short steel tube bent at 60°. The zinc-plated steel bracket holds the thermocouple in the flame with a clamping screw, and the bent mounting bracket with two slotted holes allows fixing and adjusting the position in the combustion chamber. The small, stable flame lights the main burner every time the gas tap is opened.
Why choose this original pilot burner?
Unlike generic parts, the Empero 60° pilot burner has the same head angle and thermocouple position as the factory-fitted part, which makes it suitable for:
Gas grills: the pilot flame reaches the burner ramp directly.
Gas fryers: reliable ignition of the burner under the tank.
Ranges and cookers: easy start and flame failure protection.
HoReCa service: fitting without changes to the mounting bracket or thermocouple.
Technical and Functional Advantages:
Head angled at 60°: flame directed exactly at the main burner.
Brass body: resistant to heat and corrosion.
Bracket with clamping screw: the thermocouple stays fixed in the flame.
Mounting bracket with slotted holes: adjustable position in the combustion chamber.
Specifications at a glance:
Product type: pilot burner with head angled at 60°
Product code: TPK.FDV60
Compatible with: Empero gas grills, fryers, ranges and other HoReCa gas appliances
Structure: T-shaped brass body, steel outlet tube, zinc-plated steel bracket
Connections: gas inlet with brass nut, female-threaded side connection
Easy to use
Before ordering, compare the old part with the product photos and check the appliance model: Empero pilot burners differ in head shape (built-in ignition electrode, V type, 60°, round tube, hat type) and in the position of the connections. Close the main gas valve and disconnect the appliance from the power supply before removal. Fitting must be carried out by an authorised technician, who moves the thermocouple to the new part, tightens the brass nuts and checks the connections for leaks with leak detection spray. Finally, check ignition, flame stability and gas shut-off when the flame goes out.
Easy to clean
Clean the pilot burner during the routine servicing of the appliance: with the appliance cold and the gas closed, remove deposits from the pilot head with a soft brush or compressed air. Do not use aggressive chemicals, water or sharp objects in the pilot ports, as they can change the flame shape and affect the thermocouple.
Features and advantages of the Empero 60° pilot burner
✓ Head with tube bent at 60°, for a flame directed at the burner
✓ T-shaped brass body
✓ Zinc-plated steel bracket with thermocouple screw
✓ Mounting bracket with two slotted holes
✓ Original Empero product for gas grills, fryers and ranges