The SAMIXIR YM-0218 tap hose is the original part through which the drink flows from the bowl to the tap on SAMIXIR Klasik juice dispensers (Mono 20 l, Twin 2 x 20 l and Triple 3 x 20 l), on both fountain and mixer models. A hardened, cracked or deformed hose causes dripping, difficult dispensing and drink loss, and the dispenser can no longer be used properly.
Fast dispensing, no dripping
The hose is made of flexible white rubber, with sealing ribs at one end and a pull ring at the other that makes fitting and removal for washing easy. The drink flows through it when the operator presses the tap lever and stops when the lever is released. The wide bore of the hose fills glasses quickly, one of the strengths of the SAMIXIR tap system.
Why choose this original hose?
Unlike generic hoses, the SAMIXIR YM-0218 hose has exactly the diameter, length and elasticity required by the original tap, which makes it suitable for:
Lemonade, juice and flavoured water: Steady flow and precise shut-off, with no drips on the tray.
Iced tea and iced coffee: Fast dispensing, even at high serving volumes.
Klasik dispensers with mixer or fountain: The same hose for every 20 l compartment.
Buffets, canteens and events: Withstands repeated lever presses, day after day.
Technical and Functional Advantages:
Reliable sealing: The ribs hold the hose firmly in its seat and stop leaks.
Pull ring: The hose is easy to remove and fit, without tools.
Flexible material: The white rubber returns to its shape after every dispense.
Original part: SAMIXIR code YM-0218, identical to the factory-fitted part.
Specifications at a glance:
Product type: Rubber tap hose for juice dispenser
SAMIXIR code: YM-0218
Compatible with: SAMIXIR Klasik 20, 40 and 60 (Mono, Twin, Triple)
Dimensions (cm): 11*2
Material: white rubber
Easy to use
Before ordering, check that the dispenser belongs to the SAMIXIR Klasik series (models 20, 40 or 60); the Panoramik series uses a different hose. Switch the dispenser off and unplug it, empty the bowl and pull the old hose out of the tap by its ring. Push the new hose fully in, with the ribs seated properly, then refit the tap. Fill the bowl with water and check that the tap does not drip. If in doubt, leave the fitting to an authorised technician. The hose measures approximately 11*2 cm.
Easy to clean
Wash the hose daily, together with the tap and the bowl, with warm water and a mild detergent. Clean the inside with a thin tube brush, then rinse well and let the part dry. Do not use aggressive chemicals or sharp objects, which can crack the rubber.
Features and advantages of the SAMIXIR YM-0218 tap hose
✓ Original SAMIXIR part, code YM-0218
✓ For all SAMIXIR Klasik dispensers: Mono, Twin and Triple
✓ Flexible white rubber with sealing ribs
✓ Pull ring for quick fitting and removal
✓ Fast dispensing, no dripping