Industrial washing tunnel machine with electric heating 300 crates/h
Total electric power: 25.5 kW (electrical version)
Dimensions (cm): 400*130*170
Crates washing capacity: up to 300 / h
Structure: Stainless steel AISI 304
Voltage: 3 x 380V - 50 Hz -N-PE
Power pump washing: 7.5 kW
Gearmotor conveyor belt: 0.37 kW
Heating water washing: 18 kW
Final rinse water consumption: 600/700 lt/h at 2 Bar pressure
Conveyor speed: 0.5 - 3 meters/minut
Size a loading (cm): 87*40
Crates dimensions (cm): 60*40*22
Water tank capacity: 350 lt
Washing/rinse temperature : 65°C
The double external paneling ensures that the machine has a good thermal and acoustic insulation
The pumps are centrifugal type
Control panel low voltage 24V
Tunnel is self-cleaning and built so as to avoid the stagnation of water and accumulation of dirt
Mushroom pushbuttons for stopping in case of emergency
Adjustable temperature from the control panel
An adjustable device allows to reduce the output pressure of the water from the lower shafts, that pressure will be automatically sent back to the higher ones.
The wash tubs and aspirations of the pumps are protected by filters can be easily removed for daily cleaning
The heating of the water in the tanks is via heat exchangers fed with steam condensate recovery
Utilities required: water connection, sewage, power supply 380V, chimney to exhaust the vapor form the washing
Conveying special steel and special rubber tendon, placed at the beginning of each treatment area, prevent the mixing and transport of the wash solution from one area to another.
It guarantees the complete removal of residues on the surface of the equipments and, if required, there will be a final rinsing phase featuring a chemical disinfection to eliminate bacteria.
| Product destination | Automotive |
|---|---|
| Module | Tunnel |
| Control panel | Electromechanical |
| Power supply type | Electrical supply |
| Capacity | 300 vats/h |








