The SAMIXIR YM-0220 tap lever is the black PUSH-marked handle used to dispense the drink on SAMIXIR juice dispensers of the Klasik (20, 40, 60) and Panoramik (M22, M40, S22, S40 and 22 Twin MM44, SS44, SM44) series. A broken or cracked lever, or one with worn pins, makes dispensing difficult or impossible, and the dispenser stands idle although the drink is cold and ready.
Easy one-handed dispensing
The lever is made of rigid black plastic and has a wide push surface with anti-slip ribs and the PUSH marking, plus two side pins at the top on which it pivots on the tap body. When pressed, the lever operates the tap mechanism and the drink flows into the glass; when released, the tap spring returns it to its initial position and the flow stops. The practical SAMIXIR tap system allows fast one-handed serving.
Why choose this original lever?
Unlike generic levers, the SAMIXIR YM-0220 lever matches exactly the mounting points and travel of the original tap, which makes it suitable for:
Klasik Mono, Twin and Triple dispensers: The same lever for every tap.
Panoramik M22, M40, S22, S40 and 22 Twin dispensers: Direct fitting, no adaptation.
Self-service, buffets and canteens: Withstands frequent presses by many users.
Cold drinks by the glass: Controlled dispensing, no splashing.
Technical and Functional Advantages:
Rigid plastic: Resistant to knocks and heavy use.
Anti-slip surface: The ribs and the PUSH marking guide the press.
Quick fitting: The side pins clip straight into the tap body.
Original part: SAMIXIR code YM-0220, the same on the Klasik and Panoramik series.
Specifications at a glance:
Product type: Tap lever (push handle) for juice dispenser
SAMIXIR code: YM-0220
Compatible with: SAMIXIR Klasik 20 / 40 / 60, Panoramik M22, M40, S22, S40, MM44, SS44, SM44
Dimensions (cm): 13*9
Colour / material: black, rigid plastic
Easy to use
Before ordering, check the dispenser model: the YM-0220 lever does not fit the Panoramik M10 (10 l), 10 Twin and 10 Triple, which use lever YM-0672, nor the KAM series. Switch the dispenser off, unplug it and empty the bowl, then unclip the old lever from the tap pivots. Seat the side pins of the new lever and check that it returns to the closed position by itself. Fill the bowl with water and test dispensing. If the tap spring or body is also damaged, have them replaced by an authorised technician. The lever measures approximately 13*9 cm.
Easy to clean
Clean the lever daily with a soft damp cloth and a mild detergent, especially on the push area where sugary drink residue collects. Rinse the part and wipe it dry. Do not use aggressive chemicals or abrasive sponges, which can scratch the plastic and the marking.
Features and advantages of the SAMIXIR YM-0220 tap lever
✓ Original SAMIXIR part, code YM-0220
✓ Shared by the Klasik and Panoramik series (M22, M40, S22, S40, 22 Twin)
✓ PUSH marking and anti-slip ribs
✓ One-handed dispensing
✓ Rigid black plastic, easy to clean