The YZF10-20 fountain motor is the original part fitted under the bowl of SAMIXIR fountain (fiskiye) juice dispensers, supplied with mounting bracket and drive magnet. It is rated 10/36 W, 220-240 V, 50/60 Hz, with a speed of 1300 rpm, according to its rating plate. The motor drives the magnetic pump in the bowl: if it burns out, gets noisy or no longer starts, the drink stops recirculating, is no longer mixed and cools unevenly.
Magnetic drive, no leaks
The motor is a YZF type (single-phase, shaded-pole) with ball bearings and insulation class B, mounted on a galvanised steel bracket with slotted fixing holes. A drive magnet on the shaft turns the magnetic rotor of the fountain pump through the bowl wall. There is no direct contact between motor and drink, so liquid cannot get into the motor area; this is the advantage of the magnetic system described by SAMIXIR. The same YZF10-20 motor type is also widely used on condenser and evaporator fans in commercial refrigeration equipment.
Why choose this original motor?
Unlike generic motors, the YZF10-20 motor comes mounted on its bracket and with its drive magnet, ready to install, which makes it suitable for:
Panoramik S22, S40 and 22 Twin dispensers: Motor identical to the one in the SAMIXIR catalogue (YM-0274).
Klasik fountain dispensers: Constant recirculation in the 20 l bowls.
Continuous running in the warm season: Ball bearings and insulation class B support long daily use.
Quick replacement in service: Fits directly, no bracket adaptation.
Technical and Functional Advantages:
Right power: 10/36 W, enough for the fountain pump, with low consumption.
Standard supply: 220-240 V, 50/60 Hz.
Magnetic drive: No shaft through the bowl, no risk of leaks towards the motor.
Complete set: Motor, galvanised steel bracket and drive magnet.
Specifications at a glance:
Product type: Fountain (fiskiye) motor with magnet for juice dispenser
Motor code: YZF10-20 (SAMIXIR motor code: YM-0274)
Compatible with: SAMIXIR Panoramik S22, S40, SS44, SM44 and Klasik fountain models
Power: 10/36 W
Dimensions (cm): 15*8*12
Voltage: 220-240 V, 50/60 Hz
Speed: 1300 rpm
Easy to use
Before ordering, compare the data on the old motor's rating plate (YZF10-20, 10/36 W, 220-240 V) and check the dispenser model. Unplug the dispenser, empty the bowl and remove the casing following the manufacturer's instructions. Fitting and electrical connection (live, neutral and earth, on faston terminals) must be carried out by an authorised technician. After fitting, check that the magnet turns freely without touching the casing, then refit the bowl, fill it with water and check that the pump starts and recirculates the liquid. With its bracket, the motor measures approximately 15*8*12 cm.
Easy to clean
The motor does not come into contact with the drink, but the area under the bowl must be kept clean and dry. With the dispenser unplugged, wipe the bracket and housing regularly with a dry cloth and remove dust from the ventilation grilles. Do not wash the motor with water, do not use aggressive chemicals and do not spray liquids in the electrical area.
Features and advantages of the SAMIXIR YZF10-20 fountain motor
✓ Original SAMIXIR part, Weiguang YZF10-20 motor
✓ 10/36 W, 220-240 V, 50/60 Hz, 1300 rpm
✓ Supplied with galvanised steel bracket and drive magnet
✓ Ball bearings and insulation class B for continuous running
✓ 3-wire cable with faston terminals, easy to connect
✓ CE marking on the rating plate