The EMPERO ARA.FS-BPR-UZUN long brush is the original rotating part of EMPERO EMP.BPR.001 (8 brushes, 600-720 glasses/h) and EMP.BPR.002 (5 brushes, 300-360 glasses/h) glass drying and polishing machines, sold on topk.ro under the codes BPR.001 (GPE8) and BPR.002 (GPE5). The brush enters the glass and dries and polishes it on the inside, while the hot-air fan completes the drying. A worn, flattened or dirty brush leaves marks and lint on the glasses, and the machine no longer delivers the shine it was bought for.
Drying and polishing without marks
The brush is made of white twisted textile strands packed densely along its whole length and fixed on a black plastic sleeve with a bayonet slot. The sleeve locks onto the rotating shaft of the machine, and the soft strands pick up the water left after washing and polish the glass without scratching it. The long version reaches the bottom of tall glasses and fits in the long-brush positions; the EMP.BPR.001 has 6 long and 2 short brushes.
Why choose this original brush?
Unlike generic brushes, the EMPERO ARA.FS-BPR-UZUN brush has exactly the length, density and mounting required by EMP.BPR machines, which makes it suitable for:
Wine and champagne glasses: Gentle polishing, no lint and no drop marks.
Beer and cocktail glasses: Fast drying of the inside, even on tall glasses.
Bars, hotels and catering: Steady output of up to 720 glasses per hour on the EMP.BPR.001.
Events and banquets: Glasses ready to serve straight after washing.
Technical and Functional Advantages:
Bayonet mounting: The brush is changed in seconds, without tools.
Dense textile strands: Absorb water and polish the glass evenly.
Exact fit: Original EMPERO part for EMP.BPR.001 and EMP.BPR.002 machines.
Scratch-free polishing: The soft strands protect delicate glasses.
Specifications at a glance:
Product type: Long brush (puskul) for glass drying and polishing machine
EMPERO code: ARA.FS-BPR-UZUN
Compatible with: EMPERO EMP.BPR.001 (GPE8) and EMP.BPR.002 (GPE5)
Material: white textile strands, black plastic sleeve
Mounting: bayonet type
Easy to use
Before ordering, check the machine model (EMP.BPR.001 or EMP.BPR.002) and the type of brush to replace: long (ARA.FS-BPR-UZUN) or short (ARA.FS-BPR-KISA). Switch the machine off and unplug it, then turn the old brush to release it from the bayonet and pull it off the shaft. Push the new brush onto the shaft, turn it until it locks and make sure it sits firmly. Run the machine without glasses and check that the brushes turn without rubbing. For motor or shaft faults, call an authorised technician.
Easy to clean
Remove the brushes regularly and wash them by hand with warm water and a mild detergent, then rinse well and let them dry completely before refitting. Do not use bleach, aggressive chemicals or fabric softener, which can leave residues and marks on the glasses. Replace the brushes when the strands are flattened, torn or discoloured.
Features and advantages of the EMPERO ARA.FS-BPR-UZUN long brush
✓ Original EMPERO part, code ARA.FS-BPR-UZUN
✓ For EMP.BPR.001 and EMP.BPR.002 glass drying and polishing machines
✓ White twisted textile strands for mark-free polishing
✓ Bayonet mounting, quick change
✓ Reaches the bottom of tall glasses