The Hanning haflowtic compact DPO40-100 drain pump removes the used water from the tank of Empero EMP.1000 and EMP.500 commercial dishwashers. It is fitted as a replacement for a faulty pump or as an addition on machines without a drain pump, so that draining no longer depends on gravity. A blocked or burnt-out pump leaves dirty water in the tank and stops work in the kitchen.
Fast and reliable tank draining
The pump has a 65 W synchronous motor, supplied at 200-240 V, 1~, 50/60 Hz, with a current of 0.6 A and class F insulation. The housing is made of white plastic, with a metal mounting bracket and connectors for the drain hoses. According to Hanning, the haflowtic compact DPO 40 series reaches a maximum flow of 65 l/min and a maximum pressure of 0.28 bar. The duty cycle is 15 minutes on and 45 minutes off, enough to drain the tank several times a day.
Why choose this original pump?
Unlike generic pumps, the Hanning DPO40-100 is the model fitted by Empero, with the same connectors and the same power, which makes it suitable for:
Empero EMP.1000 hood type dishwashers: complete draining at the end of the working day.
Empero EMP.500 front loading dishwashers: direct replacement or additional fitting.
Kitchens without a floor drain: the water is pumped to the sewer, with no manual emptying.
Catering equipment service: a pump from Hanning, a leading German manufacturer of appliance pumps.
Technical and Functional Advantages:
Efficient motor: 65 W and 0.6 A, at 200-240 V.
High flow: up to 65 l/min for the DPO 40 series.
Class F insulation: good temperature resistance.
Runs at 50 and 60 Hz: the same pump for different mains supplies.
Specifications at a glance:
Product type: Drain pump for dishwasher
Part code: Hanning haflowtic compact DPO40-100
Compatible with: Empero EMP.1000, EMP.500 and other Empero dishwashers
Power: 65 W
Voltage: 200-240 V, 1~, 50/60 Hz
Current: 0.6 A
Maximum flow (DPO 40 series): 65 l/min
Duty cycle: 15 min on / 45 min off
Easy to use
Before ordering, check the label of the old pump (DPO40-100, 65 W) and the machine model. Disconnect the machine from the power supply and drain the tank. Undo the hose clamps and hoses, then the screws of the metal bracket, and fit the new pump in the same position. Fitting and electrical connection must be carried out by an authorised technician. Finally, start draining with a full tank and check the connections for leaks and that all the water is drained.
Easy to clean
Clean the tank filters weekly, as recommended by Empero, and remove large residues before draining so they do not reach the pump. Clean the drain plug and drain hoses every 15 days. Wipe the outside of the pump with a damp cloth, with the machine switched off; do not use aggressive chemicals and do not spray the pump directly with water.
Features and advantages of the Hanning DPO40-100 drain pump
✓ Original Empero part, Hanning haflowtic compact pump
✓ 65 W, 200-240 V, 0.6 A, 50/60 Hz
✓ Maximum flow of up to 65 l/min (DPO 40 series)
✓ Class F insulation, CE marking
✓ Fitted as replacement or as an addition on Empero machines