The Microdos MP3-T peristaltic pump, code P09AA0103100, automatically doses liquid detergent in Empero EMP.500 and EMP.1000 series commercial dishwashers, as well as in machines from other manufacturers. It has a fixed flow rate of 3 l/h and works at a pressure of up to 1 bar. Without automatic dosing, detergent is added by hand and washing becomes uneven: sometimes too little detergent, sometimes foam and waste.
Constant detergent dosing
The pump has a blue plastic housing, a transparent cover and a roller rotor that squeezes the Santoprene peristaltic hose, a material resistant to alkaline detergents, while the suction and discharge connections take Ø 4x6 mm hose. With every turn, the rollers push a constant amount of detergent into the tank, and the liquid touches only the hose, not the pump parts. The 8 W Meteor 5RV67DM008/01 synchronous motor runs at 20/24 RPM (50/60 Hz), works at 220/240 V and withstands up to 60°C. The MP3-T version also has a dosing timer.
Why choose this original Microdos pump?
Unlike generic pumps, the MP3-T has a factory-calibrated fixed flow and a Santoprene hose suited to detergent, which makes it suitable for:
Empero EMP.500 and EMP.1000 dishwashers: the same amount of detergent in every cycle.
Multi-brand glasswashers and dishwashers: simple fitting, with a 230 V supply.
Restaurants, canteens and hotels: clean dishes, with no manual dosing and no waste.
Staff safety: the detergent is drawn straight from the container, with no hand contact.
Technical and Functional Advantages:
Fixed flow: 3 l/h, at a pressure of up to 1 bar.
Santoprene hose: suited to professional detergents.
Synchronous motor: 20/24 RPM and 8 W, at 220/240 V.
Compact design: only 10 x 7 x 7 cm, easy to place in the machine.
Specifications at a glance:
Product type: Peristaltic dosing pump for detergent
MICRODOS code: P09AA0103100 (MP3-T)
Compatible with: Empero EMP.500, EMP.1000 and multi-brand dishwashers
Dimensions (cm): 10*7*7
Voltage: 230 V AC, 50 Hz
Flow rate: 3 l/h, up to 1 bar
Hose: Santoprene, Ø 4x6 mm connections
Easy to use
Before ordering, check the label of the old pump (type, code and flow rate) and the machine model: this pump is for detergent, not for rinse aid. Disconnect the machine from the power supply. Fitting the pump, the suction hose from the container and the discharge hose to the tank, as well as the electrical connection, must be carried out by an authorised technician. After fitting, prime the pump and check the flow direction and that there are no leaks. Measuring 10 x 7 x 7 cm, the pump fits easily in the technical compartment of the machine.
Easy to clean
Wipe the outside of the pump with a damp cloth, with the machine switched off, and remove any detergent traces immediately. The Santoprene peristaltic hose is a wear part: check it regularly and replace it when it cracks or loses its elasticity. Keep the suction filter in the container clean. Do not use solvents on the transparent cover.
Features and advantages of the Microdos MP3-T detergent pump
✓ Microdos MP3-T pump, code P09AA0103100
✓ Fixed flow of 3 l/h, pressure up to 1 bar
✓ Santoprene peristaltic hose, suited to detergent, Ø 4x6 mm connections
✓ 20/24 RPM synchronous motor, 8 W, 220/240 V
✓ Compatible with Empero EMP.500, EMP.1000 and other machines (multi-brand)
✓ Weight: approx. 0.35 kg