The SAMIXIR YM-0483 magnetic pump is the original part fitted inside the bowl of SAMIXIR Klasik juice dispensers with the fountain (fiskiye) system, from the 20.SB / 20.SI / 20.SY single-bowl models to the twin and triple 40.SS, 40.SM, 60.SSS, 60.SSM and 60.SMM versions. It keeps the drink moving: without it the fountain system stops, the drink is no longer mixed and it cools unevenly in the bowl.
Continuous fountain and even cooling
The pump has a white plastic volute housing (salyangoz, 45 mm in the SAMIXIR catalogue) with a rotor and a built-in magnet. The fountain motor under the bowl drives the rotor magnetically through the bowl wall, with no shaft passing through the bowl, so the drink cannot reach the motor area. The rotor sends the drink up the fountain tube (SAMIXIR code YM-0159) to the top of the bowl, from where it flows back into the tank. The patented SAMIXIR fountain system mixes the drink, cools it quickly and gives it a fresh, appealing look.
Why choose this original pump?
Unlike generic pumps, the SAMIXIR YM-0483 pump has exactly the shape and magnetic coupling of the original system, which makes it suitable for:
Lemonade and pulp-free juice: Continuous fountain, the drink stays uniform and fresh.
Iced tea and iced coffee: Constant recirculation and fast cooling throughout the bowl.
Klasik Mono, Twin and Triple dispensers: The same pump for every fountain compartment.
Terraces, buffets and canteens: Long-lasting operation, even with heavy traffic.
Technical and Functional Advantages:
Magnetic coupling: No direct contact with the motor, so no risk of leaks into the electrical area.
Quick fitting: The pump sits on its seat in the bowl and connects to the fountain tube.
Original part: SAMIXIR code YM-0483, identical to the factory-fitted pump.
Compact size: Approximately 10*6 cm, it takes up little room in the bowl.
Specifications at a glance:
Product type: Magnetic fountain pump (rotor) for juice dispenser
SAMIXIR code: YM-0483
Compatible with: SAMIXIR Klasik 20.S, 40.SS, 40.SM, 60.SSS, 60.SSM, 60.SMM (B / I / Y)
Pump size: 45 mm
Dimensions (cm): 10*6
Easy to use
Before ordering, check the dispenser model on the rating plate: the YM-0483 pump fits the Klasik fountain series, not the Panoramik S22 / S40 series, which uses a different pump. Switch the dispenser off and unplug it, empty and wash the bowl, then remove the fountain tube and the old pump. Fit the new pump on its seat, connect the fountain tube and check that the rotor turns freely. After fitting, fill the bowl with water and start the fountain for a test run. If the motor does not drive the pump, call an authorised technician. The pump measures approximately 10*6 cm.
Easy to clean
Remove and wash the pump every time the bowl is emptied, with warm water and a mild detergent. Rinse the rotor and the outlet channel well so that no sugar deposits remain, then let the part dry. Do not use aggressive chemicals or metal objects, which can scratch the plastic and jam the rotor.
Features and advantages of the SAMIXIR YM-0483 magnetic pump
✓ Original SAMIXIR part, code YM-0483 (45 mm volute pump)
✓ For SAMIXIR Klasik juice dispensers with fountain system
✓ Magnetic coupling, no leaks towards the motor
✓ Even mixing and cooling of the drink
✓ Easy to remove and wash