The YKO315K16 programmer (cam switch), Empero code M.ELK-SLT-PKO-014, is the rotary selector on the control panel of Empero EMP.1000 and EMP.500 commercial dishwashers with mechanical control. With it, the operator switches the machine on, starts water filling and chooses the wash programme. When the switch contacts wear out or burn, the machine no longer starts, no longer fills the tank or stays stuck on one programme.
Reliable programme selection
The switch has a modular design, with 5 orange plastic contact cells and 10 screw terminals numbered from 1 to 10. The square front plate, with 4 fixing holes, and the black rotary knob are fitted on the machine panel. The contacts are rated at 16 A at 230 V, 50-60 Hz, in utilisation category AC-23, suitable for switching motors and inductive loads.
Why choose this original programmer?
Unlike generic switches, the original programmer has the same cams and contact diagram as the factory-fitted part, which makes it suitable for:
Empero EMP.1000 hood type dishwashers: the same positions for filling and for the programmes.
Empero EMP.500 front loading dishwashers: direct replacement, with the same wiring.
Busy professional kitchens: heavy-duty contacts for thousands of operations.
Catering equipment service: the wires are moved terminal by terminal, with no changes to the wiring diagram.
Technical and Functional Advantages:
Heavy-duty contacts: 16 A, category AC-23, for motors and inductive loads.
Modular design: 5 contact cells and 10 screw terminals.
Front mounting: square plate with 4 fixing holes and rotary knob.
Clear marking: terminals numbered from 1 to 10 make wiring easier.
Specifications at a glance:
Product type: Programmer / cam switch for dishwasher
EMPERO code: M.ELK-SLT-PKO-014
Part code: YKO315K16
Compatible with: Empero EMP.1000, EMP.500 (mechanical / analogue control)
Voltage: 230 V, 50-60 Hz
Rated current: 16 A (AC-23)
Terminals: 10
Easy to use
Before ordering, check the YKO315K16 code on the old switch and the machine model. Disconnect the machine from the power supply. Photograph the connections and note the terminal number for each wire, then remove the knob and undo the front plate screws. Fitting and moving the wires to the same terminals must be carried out by an electrician or an authorised technician. Finally, check every position of the selector: on, filling and the wash programmes.
Easy to clean
The programmer sits behind the control panel. Wipe the knob and the panel with a soft, slightly damp cloth, with the machine switched off; Empero advises not to spray the machine directly with water, to protect the motor and the electrical components. Do not use solvents or aggressive chemicals on the knob and the front plate.
Features and advantages of the Empero YKO315K16 programmer
✓ Original Empero part, code M.ELK-SLT-PKO-014
✓ 16 A, 230 V, AC-23 cam switch
✓ 5 contact cells and 10 screw terminals
✓ Rotary knob and front mounting plate
✓ For Empero EMP.1000 and EMP.500 machines with mechanical control