The M.ELK-RZS-BRU-BYM-030 boiler heating element heats the rinse water in Empero EMP.500, EMP.500-D, EMP.500-SD, EMP.500-F and EMP.500-SDF front loading commercial dishwashers. The flange carries the marking T.ISISAN UPI 5KW 220/220V TSE 02.22 F2120-1P, meaning a power of 5 kW. Without this element the rinse water no longer reaches the required temperature, and the dishes are left with marks and are not properly sanitised.
Fast heating of the rinse water
The heater has three tubular immersion elements mounted on a triangular metal flange, with 6 threaded terminals and brass link bridges to connect the elements. It is sealed in the boiler with a silicone O-ring, and the flange has a pocket for the temperature sensor. The elements heat the boiler water directly, so the final rinse is done with hot water of at least 75°C, as recommended by Empero.
Why choose this original heating element?
Unlike generic parts, the original element has exactly the flange, length and power designed for the boiler of Empero EMP.500 machines, which makes it suitable for:
Empero EMP.500 front loading dishwashers: hot rinse in every cycle, with no adaptations.
EMP.500-D, EMP.500-SD, EMP.500-F and EMP.500-SDF versions: the same element for the whole series.
Restaurants, bars and cafes: clean glasses and plates, with no marks after rinsing.
Catering equipment service: quick replacement after an element burns out or after heavy limescale build-up.
Technical and Functional Advantages:
High power: 5 kW, to quickly reheat the water between cycles.
Three heating elements: heat evenly distributed in the boiler.
Secure connections: 6 threaded terminals with brass link bridges.
Good sealing: silicone O-ring where it passes through the boiler wall.
Specifications at a glance:
Product type: Boiler (rinse) heating element for dishwasher
EMPERO code: M.ELK-RZS-BRU-BYM-030
Marking: T.ISISAN UPI 5KW 220/220V TSE 02.22 F2120-1P
Compatible with: Empero EMP.500, EMP.500-D, EMP.500-SD, EMP.500-F, EMP.500-SDF
Power: 5 kW
Voltage: 220/220 V
Terminals: 6, with link bridges
Easy to use
Before ordering, compare the marking and the power on the flange of the old element with the data above and check the machine model. Disconnect the machine from the power supply, close the water supply and drain the boiler. Fitting and electrical connection must be carried out by an authorised technician, with the link bridges placed exactly as on the old part and the O-ring correctly seated on the flange. After fitting, fill the boiler with water before powering the element, then check for leaks and the rinse water temperature.
Easy to clean
The heater is maintained by descaling the boiler regularly: Empero recommends removing limescale once or twice a year, while the rinse nozzles are cleaned monthly with vinegar or a descaling solution. Limescale on the elements reduces heat transfer and shortens the life of the heating element. Do not use wire brushes or aggressive chemicals on the element sheath.
Features and advantages of the Empero EMP.500 boiler heating element
✓ Original Empero part, marked T.ISISAN UPI 5KW
✓ 5 kW power, 3 tubular immersion elements
✓ Triangular flange with silicone O-ring
✓ 6 threaded terminals with brass link bridges
✓ For the whole Empero EMP.500 front loading series