The brass gear with MAXIMA code 09356117 is the original transmission part of the Maxima MMM32 meat mincer (code 09300455), a professional no. 32 mincer with a capacity of up to 320 kg/h. When the gear teeth wear or break, the mincer becomes noisy, loses power or no longer drives the feed screw at all, and work in the butcher shop or kitchen comes to a halt.
Reliable transmission of the mincing force
The part is made of brass, a wear-resistant, low-friction material suited to gears working under heavy load. The gear has a bore with a keyway and is fitted on the shaft inside the mincer gearbox, where it takes the drive from the 1500 W motor and passes it on to the feed screw, both in forward and in reverse.
Why choose this original gear?
Unlike generic parts, the original MAXIMA gear has exactly the number of teeth, pitch and bore required by the MMM32 gearbox, which makes it suitable for:
Butcher shops: continuous mincing without jams or gearbox noise.
Restaurants and canteens: the mincer is quickly back at work after the repair.
Cured-meat and sausage workshops: precise meshing with large volumes of meat.
HoReCa service companies: direct replacement, without gearbox adjustments.
Technical and Functional Advantages:
Quality material: Wear-resistant brass with low friction in the gear train.
Exact fit: Original dimensions (Ø 5.1 x 2.4 cm) and a keyway for secure locking on the shaft.
Quiet operation: Correct meshing reduces gearbox noise and vibration.
Long service life: Withstands frequent starts and changes of rotation direction.
Specifications at a glance:
Product type: Brass gear / pinion
MAXIMA code: 09356117
EAN code: 8720783921898
Compatible with: Maxima MMM32 meat mincer (09300455)
Material: brass
Dimensions (cm): Ø 5.1 x 2.4
Compatible machine: no. 32 mincer, 320 kg/h, 1500 W, 230 V
Easy to use
Before ordering, check code 09356117 and the machine model (MMM32, code 09300455) on the rating label. Disconnect the mincer from the power supply before any work. Fitting must be carried out by an authorised technician: open the gearbox housing, remove the worn gear, fit the new part on the shaft and lock it with the key, then check the gear lubrication. After fitting, run the machine empty in both directions and check that it runs smoothly and quietly. Dimensions (cm): Ø 5.1 x 2.4.
Easy to clean
When fitting, wipe old grease and metal particles off the seat and the shaft with a dry cloth. The gear sits inside the gearbox and does not come into contact with food. Do not use aggressive solvents or wire brushes, which can scratch the brass teeth.
Features and advantages of the MAXIMA MMM32 brass gear
✓ Original MAXIMA part, code 09356117
✓ Wear-resistant, low-friction brass
✓ Keyway for secure locking on the shaft
✓ Compatible with the Maxima MMM32 meat mincer (09300455), no. 32 mincer
✓ Dimensions (cm): Ø 5.1 x 2.4
✓ Weight: 0.24 kg