The E.G.O. 55.19082.805 thermostat is the working thermostat for electric pizza ovens and for bakery and pastry ovens, with an adjustment range from 85 to 455°C. It is fitted in Empero pizza ovens (Empero code M.ELK-MEK-TRM1-002) as well as in Pizza Group, Moretti, Italforni, Cuppone, GAM and CB ovens. When the thermostat fails, the oven no longer holds its temperature: the base comes out burnt or underbaked and baking becomes impossible to control.
Precise control of the baking temperature
The thermostat works on the expansion of the liquid in the bulb: the Ø 4 mm, 228 mm long copper bulb is fitted in the baking chamber and the 870 mm capillary carries the signal to the thermostat body. The 1NO contact, rated 16 A at 250 V, switches the heating elements on and off to keep the temperature selected on the knob. The metal body with ceramic base and the Ø 6 x 4.6 mm D-profile shaft are the E.G.O. standard used by most pizza oven manufacturers.
Why choose this original E.G.O. thermostat?
Unlike generic parts, the E.G.O. 55.19082.805 thermostat goes up to 455°C and stays accurate at the high temperatures of a pizza oven, which makes it suitable for:
Empero pizza ovens: Part code M.ELK-MEK-TRM1-002, for the single-phase ovens.
Pizza Group, Moretti, Italforni, Cuppone ovens: The same E.G.O. thermostat, the same fitting.
Neapolitan pizza restaurants: High, stable temperatures for a crisp, well-baked base.
Bakeries and pastry shops: Even baking of bread, puff pastry and pastry products.
Technical and Functional Advantages:
Wide adjustment range: 85-455°C, from keeping warm to baking pizza.
Heavy-duty contact: 1-pole 1NO, 16 A at 250 V.
Long capillary: 870 mm, sheathed, easy to route inside the oven.
Standard shaft: Ø 6 x 4.6 mm, suitable for common E.G.O. knobs.
Specifications at a glance:
Product type: Working thermostat for pizza oven and bakery oven
E.G.O. code: 55.19082.805
Empero code: M.ELK-MEK-TRM1-002
Compatible with: Empero, Pizza Group, Moretti, Italforni, Cuppone, GAM, CB, La Minerva
Working temperature: 85-455°C
Switching capacity: 16 A / 250 V, 1-pole
Bulb: Ø 4 x 228 mm, capillary 870 mm
Easy to use
Before ordering, check the code stamped on the body of the old thermostat (55.19082.805) and the oven model. Disconnect the oven from the power supply and wait until it has cooled down completely. Remove the bulb from its seat without bending the capillary sharply, then fit the new thermostat with the bulb in the same position. Fitting and electrical connection must be carried out by an authorised technician; after fitting, check that the heating elements switch on and off at the set temperature. The bulb is Ø 4 mm and 228 mm long and the capillary is 870 mm long.
Easy to clean
The thermostat sits in the control panel and the bulb in the baking chamber. When cleaning the oven, remove flour and dough residues around the bulb with a soft brush, without knocking or bending the bulb and the capillary. The label on the body warns that the filling in the bulb reacts with water (risk of fire and burns): never cut or puncture the bulb or the capillary. Wipe the knob and the panel with a slightly damp cloth, without harsh chemicals.
Features and advantages of the E.G.O. 55.19082.805 pizza oven thermostat
✓ Original E.G.O. part, code 55.19082.805
✓ 85-455°C temperature range for pizza and bakery ovens
✓ 1-pole, 1NO contact, 16 A
✓ Ø 4 x 228 mm bulb and 870 mm capillary
✓ Suitable for Empero, Pizza Group, Moretti, Italforni, Cuppone ovens and many others