The E.G.O. 55.17039.140 working thermostat controls the oil temperature in professional electric deep fryers, between 100 and 190°C. It is the part used on Empero fryers and on other countertop or floor fryers fitted with an E.G.O. thermostat. When the thermostat fails, the oil no longer reaches frying temperature or overheats, and food comes out greasy or burnt.
Constant oil temperature
The thermostat has a metal body on a heat-resistant ceramic base and a long bulb connected to the body by a 2 m coiled capillary. The bulb is fixed next to the heating element, in the oil, and the liquid inside expands as the temperature rises and operates the contacts. The heating element therefore switches on and off automatically and the oil stays at the temperature set on the knob, from 100 up to 190°C.
Why choose this original E.G.O. thermostat?
Unlike generic parts, the E.G.O. 55.17039.140 thermostat stays accurate even after thousands of on-off cycles, which makes it suitable for:
Empero electric deep fryers: The part used on Empero professional fryers.
Fast-food outlets and restaurants: Crisp fries, at the same temperature in every batch.
Doughnut shops and bakeries: Evenly browned doughnuts, without excess oil.
HoReCa service companies: E.G.O. code stamped on the body, easy to check before ordering.
Technical and Functional Advantages:
Ceramic base: Withstands the heat inside the fryer panel.
Long 2 m capillary: Makes it easy to route the bulb into the tank.
Range suited to frying: 100-190°C.
E.G.O. quality: German manufacturer of components for professional equipment.
Specifications at a glance:
Product type: Working thermostat for electric deep fryer
E.G.O. code: 55.17039.140
Compatible with: Empero electric deep fryers and other fryers with the E.G.O. 55.17039.140 thermostat
Working temperature: 100-190°C
Capillary: 2 m, coiled
Power supply: single-phase
Easy to use
Before ordering, check the code stamped on the body of the old thermostat (55.17039.140) and the fryer model. Disconnect the fryer from the power supply, let the oil cool down and drain the tank. Remove the bulb from its holder on the heating element without bending the capillary sharply, then fit the new bulb in the same position. Fitting and electrical connection must be carried out by an authorised technician; after fitting, check that the oil heats up and that the fryer stops at the set temperature.
Easy to clean
At every oil change, wipe the bulb and capillary in the tank with a soft cloth or sponge and warm water with a mild detergent, then rinse and dry thoroughly. Do not use wire brushes or harsh cleaning agents, which can damage the bulb. The thermostat body stays in the control panel and is only wiped on the outside, with the fryer disconnected.
Features and advantages of the E.G.O. 55.17039.140 fryer thermostat
✓ Original E.G.O. part, code 55.17039.140
✓ 100-190°C adjustment range, ideal for frying
✓ Heat-resistant ceramic base
✓ 2 m coiled capillary
✓ Suitable for Empero electric deep fryers