The M.ELK-LMB-AMP-001 UV tube is the original ultraviolet lamp of the Empero EMP.BST.001 knife sterilizer. The lamp emits germicidal ultraviolet radiation that destroys bacteria, viruses and moulds on knife blades and utensils, without water and without chemicals. Without a working UV tube, the sterilizer is just a knife holder, and kitchen hygiene is no longer guaranteed.
Sterilization with ultraviolet light
The tube is made of glass that lets UV radiation through and contains mercury vapour, which emits ultraviolet light when the lamp is switched on. It has a metal base with two pins at one end, while the other end is sealed; the tube fits quickly into the lamp holder of the sterilizer chamber, under the metal protective grid. In the EMP.BST.001 sterilizer, the lamp lights only with the door closed, thanks to the safety microswitch, and the cycle time is set on the timer.
Why choose this original UV tube?
Unlike generic UV lamps, this tube has the right length, base and power for the Empero EMP.BST.001 sterilizer, which makes it suitable for:
Restaurants and pizzerias: daily sterilization of kitchen knives.
Butcher shops and meat processing rooms: knife hygiene after every shift.
Pastry and confectionery shops: clean utensils, without odours and without detergent residues.
Food businesses subject to sanitary inspections: easy-to-demonstrate utensil hygiene.
Technical and Functional Advantages:
Germicidal UV light: sterilization without water, heat or chemicals.
Single-ended 2-pin base: quick replacement, no special tools.
Exact fit: same length and same base as the originally fitted tube.
Safe operation: the lamp works only with the sterilizer door closed.
Specifications at a glance:
Product type: UV tube / germicidal ultraviolet lamp
Empero code: M.ELK-LMB-AMP-001
Compatible with: Empero EMP.BST.001 knife sterilizer (10 knives)
Base: metal, 2 pins, single-ended
Structure: glass tube, mercury vapour
Easy to use
Before ordering, check the sterilizer model (EMP.BST.001) on the rating plate. Unplug the sterilizer and wait for the old tube to cool down. Remove the protective grid, pull the old tube out of the lamp holder by its base and fit the new tube, then put the grid back. Touch the glass as little as possible, preferably with clean gloves, because grease marks reduce the efficiency. Finally, close the door and check that the lamp lights up. The used tube contains mercury and must be taken to an electrical waste collection point, not thrown away with household waste.
Easy to clean
Wipe the tube regularly with a soft cloth, dry or slightly moistened with alcohol, only with the sterilizer unplugged and the tube cold. Dust and grease on the glass reduce the UV radiation. Do not use abrasive products or aggressive chemicals, and never look directly at the lit lamp.
Features and advantages of the UV tube for Empero knife sterilizers
✓ Original Empero part, code M.ELK-LMB-AMP-001
✓ Compatible with the EMP.BST.001 knife sterilizer
✓ Germicidal ultraviolet light, no chemicals
✓ Metal base with 2 pins, quick fitting
✓ Clear glass tube that lets UV radiation through