The TORK 103.10 1/2" T-GD solenoid valve (Empero code M.ELK-SLN-MTL-003) is the original gas solenoid valve of Empero gas boiling pans. It opens and closes the gas supply to the burner on the command of the control system: when the valve fails, the burner no longer lights or the gas is no longer shut off on command. The coil works at 220-230 V AC, 15 VA, and the brass body has 1/2" connections and a 10 mm orifice.
Safe control of the gas supply
When the coil is energised, the magnetic field lifts the plunger and opens the gas passage; when the voltage is cut, the spring closes the valve and shuts off the gas immediately. The body is made of brass, with a 1/2" female thread, and the flow direction is marked with an arrow (1 to 2). The encapsulated coil is rated IP65 and designed for continuous duty (100% ED), and the connector with cable gland protects the electrical connection from moisture and steam. The working pressure is 0-1 bar.
Why choose this original valve?
Unlike generic solenoid valves, the TORK valve has exactly the connections, orifice and coil used by Empero and carries the CE marking with notified body number 0045, which makes it suitable for:
Empero gas boiling pans: safe lighting and shut-off of the burner.
Gas cooking equipment with a TORK 1/2" solenoid valve: direct replacement, no adapters.
Kitchens with long working hours: coil designed for continuous duty (100% ED).
Steamy and humid environments: IP65 coil and connector.
Technical and Functional Advantages:
220-230 V AC, 15 VA, 50/60 Hz coil: low consumption, suited to the control system of the boiling pan.
Brass body: resistant to corrosion and to the temperatures near the burner.
10 mm orifice: gas flow suited to the burner of the boiling pan.
IP65 protection: reliable operation in steamy kitchens.
Flow direction marked on the body: error-free fitting.
Specifications at a glance:
Product type: 2-way gas solenoid valve
Empero code: M.ELK-SLN-MTL-003
Part code: TORK 103.10 1/2" T-GD (type S105003100N on the label)
Compatible with: Empero gas boiling pans
Coil voltage: 220-230 V AC, 15 VA, 50/60 Hz
Connections: 1/2", 10 mm orifice
Working pressure: 0-1 bar
Easy to use
Before ordering, check the label of the old valve (TORK, 1/2", 10 mm orifice) and the coil voltage. Close the main gas valve and disconnect the boiling pan from the power supply. Remove the coil connector, dismantle the old valve and fit the new valve following the flow direction marked on the body (1 to 2), with gas-approved sealing on the threads. Fitting must be carried out only by an authorised gas technician; after fitting, check the joints for leaks with leak detection spray or a gas detector, then check the operation of the burner.
Easy to clean
The valve needs no routine maintenance. Wipe the body and the coil with a dry cloth, only with the boiling pan switched off and cooled down. Do not use pressurised water, solvents or aggressive chemicals near the valve, and do not dismantle the coil or the valve body.
Features and advantages of the TORK gas solenoid valve
✓ Original TORK part, used by Empero in gas boiling pans
✓ 220-230 V AC, 15 VA, 50/60 Hz coil, continuous duty (100% ED)
✓ Brass body, 1/2" connections, 10 mm orifice
✓ Working pressure 0-1 bar
✓ IP65 protection, CE marking